Notker — Disce Musicam

User guide.

Your song. Every part. One complete practice workflow—from your first import to your next device.

Start with your first song

Mac · iPhone · iPad
Step-by-step instructions with real Notker screens.

Edition 01 · November 2026
Demo sessions shown for illustration.
01 Import02 Separate03 Listen & practice04 Save & organize05 Export & transfer
01

Load your first song

Start with an audio file stored on your device.

Mac workspace: Import in the sidebar, Separate at the top, playback along the bottom123
Mac workspace: Import in the sidebar, Separate at the top, playback along the bottom · Select image for a larger, scrollable view
  1. 1
    Import your song

    Choose Import, then pick a local audio file.

  2. 2
    Start listening

    Press Play after the waveform loads.

  3. 3
    Reopen a session

    Choose Open for an existing .notker file.

Detailed instructions
  1. Choose Import in the sidebar. On iPhone or iPad, open Library first if the sidebar is hidden.
  2. Choose a song in the file picker. Try WAV, AIFF, MP3, AAC/M4A, or FLAC. Notker accepts supported audio at 44.1 kHz or 48 kHz.
  3. Wait for the waveform to load. Press the Play triangle to listen. On Mac, Space plays or pauses.
  4. To return to a saved session on Mac, choose Open. On iPhone or iPad, use Import or open the transferred document with Notker.
Back to contents ↑
02

Find your way around

Three areas take you from listening to practice.

01 · Library & saved loops

The sidebar holds Import, Save, Export, Music Library, Playlist, and your saved phrases.

02 · Song & waveforms

Choose an instrument under Focus on, seek in the timeline, and watch the playhead move.

03 · Practice controls

Play, set loop points, slow down, transpose, zoom, and adjust listening volume.

iPhone workspace with Library, Separate, Focus on, waveforms, and practice controls123
iPhone workspace with Library, Separate, Focus on, waveforms, and practice controls · Select image for a larger, scrollable view
  1. 1
    Open your music

    Import and Save live in the Controls sidebar.

  2. 2
    Separate the song

    Tap Separate to choose instruments.

  3. 3
    Practice the phrase

    Adjust speed, then set Loop In and Loop Out.

Touch controls on iPhone & iPad

Use these gestures on the mobile app. Touch the waveform to move through time; touch the instrument’s name to focus or rearrange a track.

Follow the gestures on screen

Real iPhone and iPad screens with touch annotations. The same gestures work on both devices.

iPad · Pinch to zoom

iPad waveform view: two fingers spread apart to zoom in, then move together to zoom out1 · Spread → zoom in2 · Pinch → zoom out
iPad waveform view: two fingers spread apart to zoom in, then move together to zoom out · Circles mark finger contact; arrows show movement. Select to enlarge.
  1. 1
    Spread two fingers

    Touch the waveforms with two fingers, then spread them horizontally or diagonally to inspect a smaller section.

  2. 2
    Bring two fingers together

    Pinch inward to see more of the song. A nearly vertical pinch does not change zoom.

  3. 3
    Move the view

    Once zoomed in, slide two fingers together left or right. Tap the zoom ratio to fit the whole song.

iPhone · Tap, hold & drag tracks

iPhone track controls: tap Vocals to focus; hold Guitar and drag vertically to reorder1 · Tap name → focus2 · Hold name → drag ↑↓3 · Saved loop options
iPhone track controls: tap Vocals to focus; hold Guitar and drag vertically to reorder · Circles mark finger contact; arrows show movement. Select to enlarge.
  1. 1
    Tap to focus

    Tap the instrument name or icon once. Tap it again to clear that focus. Use S to solo and M to mute.

  2. 2
    Hold, then move

    Hold the name or icon briefly, then drag up or down. Release where you want the lane. Start on the name, away from the waveform.

  3. 3
    Saved loops

    Tap a loop to recall it. Hold its name/icon to arrange it. Swipe left and tap Delete in swipe versions; this screen shows ··· → Delete instead.

iPad · Hold a channel, then drag

iPad mixer: hold Guitar channel name and drag horizontally; drag the divider vertically to resize1 · Hold name → drag ←→2 · Drag divider ↑↓
iPad mixer: hold Guitar channel name and drag horizontally; drag the divider vertically to resize · Circles mark finger contact; arrows show movement. Select to enlarge.
  1. 1
    Reorder mixer channels

    Hold the channel name, then drag left or right. Release to keep its new position. The fader below still controls volume.

  2. 2
    Resize the iPad mixer

    Drag the small divider handle up or down to give more room to the mixer or waveforms.

  3. 3
    Adjust by touch

    Drag a fader vertically for level. Drag Pan horizontally; double-tap Pan to center it.

iPhone · Swipe left to remove

iPhone playlist: swipe left across the First Light song row to reveal its removal action1 · Swipe left on the song row2 · Tap the action that appears
iPhone playlist: swipe left across the First Light song row to reveal its removal action · Circles mark finger contact; arrows show movement. Select to enlarge.
  1. 1
    Swipe from right to left

    Start on the song row and move left along the arrow. Then tap the red delete action that appears. This capture shows the row before the swipe.

  2. 2
    Tap the revealed action

    After swiping, tap the red delete action. For a whole playlist, swipe its row in the playlist list and tap Remove Playlist. For saved loops, swipe left and tap Delete; use ··· → Delete where shown.

  3. 3
    Your audio stays in the library

    Removing a playlist or its song entry keeps the song in Music Library. Deleting a saved loop removes the phrase settings, not the audio.

Tap to seek

On a waveform: tap the place you want to hear. The playhead moves to that time. Tap the Play triangle to play or pause.

Drag to scrub

On a waveform: drag one finger horizontally to move the playhead through the song. Lift your finger to finish seeking.

Pinch to zoom in or out

Over the waveforms: spread two fingers apart horizontally or diagonally to zoom in; pinch them together to zoom out. Your fingers can be on different instrument lanes. Tap the zoom ratio, such as 2.0×, to show the whole song.

Move the zoomed view

Over the waveforms: slide two fingers together left or right to see another part of the timeline. Keep the distance between your fingers steady. This moves the view; use one finger when you want to move the playhead.

Tap to focus a track

On an instrument name or its Focus on button: tap to focus that track. Tap its name again to clear that focus. Focusing changes the view; tap S to solo the sound, or M to mute it.

Hold, then drag to reorder

On a track’s name or icon: hold briefly, then drag up or down to move its waveform lane. Release to keep the order. In Mix, hold the channel name and drag left or right to reorder the strips. Begin on the name, leaving faders and waveform gestures free for their own controls.

Set and adjust loop points

In the timeline and loop controls: pause for precision, tap the phrase start on the waveform, then tap Loop In. Tap the phrase end, then Loop Out. Enable Loop and drag the visible IN or OUT tag horizontally to refine a boundary. Tap Save Loop to keep the phrase. A hold on the waveform is not required to set a loop point.

Drag speed; double-tap to reset

In the Speed control: drag the slider to set playback speed. Double-tap the speed slider/area, or tap the displayed percentage, to return to 100%. On iPhone, swipe the bottom transport strip sideways if a control is off-screen. Tap transpose − or + to change key; tap the middle Original / semitone value to reset pitch.

Adjust the touch mixer

In Mix: drag a fader vertically for level. Drag Pan horizontally; double-tap its slider to center it. On iPad, drag the divider between the waveforms and mixer up or down to resize the mixer.

Recall, rename & arrange loops

Under Saved loops: tap a saved loop to recall its points, speed, and transposition. Touch and hold a loop row for its context actions or to begin dragging it to a new position. If your version shows a ··· button, use it for Rename or Delete and hold the loop name/icon to drag.

Swipe left to remove

On a playlist or saved-loop row: swipe from right to left to reveal the red action, then tap Remove Playlist or Delete. For a saved loop, reveal the button and tap it rather than relying on a full swipe. In versions with loop options, ··· → Delete is also available.

Edit the songs in a playlist

Inside a playlist: swipe left on a song row, then tap the delete action to remove it from that playlist. Tap Edit and drag the reorder handles to change song order. Removing a playlist or one of its entries keeps the songs in Music Library; deleting a loop removes that saved phrase, not the song’s audio.

Make a loop with touch
  1. 1Tap the start → Loop In
  2. 2Tap the end → Loop Out
  3. 3Enable Loop → adjust IN / OUT → Save Loop
Back to contents ↑
03

Separate the instruments

Turn the recording into parts you can hear and study.

Separation picker with templates and editable instrument choices123
Separation picker with templates and editable instrument choices · Select image for a larger, scrollable view
  1. 1
    Pick a template

    Choose the starting instrument group for this song.

  2. 2
    Adjust instruments

    Use Add instrument or remove a selected part.

  3. 3
    Begin separation

    Choose Separate and keep Notker open.

Detailed instructions
  1. Choose Separate in the song window.
  2. Pick a starting template: Standard Band, Jazz Ensemble, Guitar Study, Vocal Study, Rhythm Section, or Custom.
  3. Review the instrument list. Add or remove instruments to suit this song. Remainder is always included; it holds material outside the selected parts.
  4. Choose Separate to begin, and keep Notker open until processing finishes. The instrument waveforms appear when ready.
Back to contents ↑
04

Listen, focus & compare

Find the part you want to learn, then hear it in context.

Guitar focus with its highlighted waveform and Solo control123
Guitar focus with its highlighted waveform and Solo control · Select image for a larger, scrollable view
  1. 1
    Select Instrument mix

    Hear the separated parts and your mixer changes.

  2. 2
    Solo your part

    Press S on the Guitar lane to isolate it.

  3. 3
    Find the phrase

    Click the waveform to seek; use zoom for detail.

Focus on

Select the instrument name to enlarge its lane. Focus changes the view; use Solo to isolate the sound.

S · Solo / M · Mute

Solo a part to hear it clearly. Solo several parts together, or mute your part to practice with the others. Mute takes precedence.

Original mix / Instrument mix

Use the mix selector to compare the untouched recording with the separated instruments. Stem mixer changes are heard in Instrument mix.

Detailed instructions
  1. Choose Instrument mix, then solo the instrument you are learning.
  2. Click or tap the waveform to seek to a phrase. Use zoom controls to inspect it; return to the whole-song view when you need context.
  3. Turn Solo off to hear the arrangement again. Switch to Original mix to play or sing along with the original master.
Back to contents ↑
05

Create & save a loop

Make a difficult phrase repeat while you work on it.

Saved Opening phrase loop with In and Out boundaries and speed at 66%1234
Saved Opening phrase loop with In and Out boundaries and speed at 66% · Select image for a larger, scrollable view
  1. 1
    Set the beginning

    Seek to the phrase start, then choose Loop In.

  2. 2
    Set the ending

    Seek to its end, then choose Loop Out.

  3. 3
    Repeat the phrase

    Enable Loop, then press Play.

  4. 4
    Save and recall

    Use Save current loop; select a saved phrase to recall it.

Loop controls close-up: set In and Out, enable Loop, then save1234
Loop controls close-up: set In and Out, enable Loop, then save · Select image for a larger, scrollable view
  1. 1
    Mark Loop In

    Choose the start of the phrase.

  2. 2
    Mark Loop Out

    Choose the end of the phrase.

  3. 3
    Enable Loop

    Repeat between the two points.

  4. 4
    Save the loop

    Keep this phrase for your next session.

Detailed instructions
  1. Seek to the start of the phrase and choose Loop In.
  2. Seek to the end and choose Loop Out. On Mac you can also drag across a waveform, then adjust the loop boundaries.
  3. Enable Loop and press Play. Adjust the in and out points until the phrase repeats naturally.
  4. Choose Save loop / Save Loop. Select the saved phrase in the sidebar to recall it, including its speed and transposition.
  5. On Mac, right-click a saved loop to rename or delete it. On iPhone or iPad, swipe left on the saved loop and tap Delete. Touch and hold for Rename; use the ··· options menu where your version shows it.
Back to contents ↑
06

Slow down & transpose

Work at a comfortable tempo, then build up to the recording.

Playback close-up: speed slider, percentage reset, transpose, and zoom123
Playback close-up: speed slider, percentage reset, transpose, and zoom · Select image for a larger, scrollable view
  1. 1
    Set your speed

    Move the Speed slider to a comfortable tempo.

  2. 2
    Return to full speed

    Select the percentage to reset to 100%.

  3. 3
    Change the key

    Use minus or plus to transpose by semitones.

Speed · 25–200%

Move the speed slider to slow down or accelerate playback while preserving pitch. Select the percentage to return to 100%.

Transpose · −24 to +24

Use the minus and plus controls to change pitch in semitones. Return to Original / zero when you want the recording’s key.

A practice progression

Loop a short phrase at 60%, learn the notes, then try 75%, 90%, and 100%. Save useful checkpoints as loops.

Back to contents ↑
07

Shape your practice mix

Balance the instruments around the part you are playing.

Notker mixer with channel faders, pan controls, mute, solo, and master output1234
Notker mixer with channel faders, pan controls, mute, solo, and master output · Select image for a larger, scrollable view
  1. 1
    Balance the level

    Move a channel fader to bring its part forward.

  2. 2
    Place it in stereo

    Move Pan left or right.

  3. 3
    Mute or solo

    M makes room for you; S isolates a part.

  4. 4
    Set output level

    Use Master for overall listening volume.

Level

Move a channel fader to bring a part forward or tuck it underneath the others. Use Master for overall listening level.

Pan

Move a channel left or right in the stereo field to make parts easier to distinguish.

Mute & Solo

Mute your instrument for a backing track, or solo an instrument pair to study their interaction.

Detailed instructions
  1. Select Instrument mix, then open Mix.
  2. Adjust faders, pan, Mute, and Solo while listening. Lower levels if the combined mix distorts.
  3. Close Mix when you want more waveform space. Use Save to keep your work.
Back to contents ↑
08

Add notes & musical landmarks

Leave yourself a map for the next practice session.

Song guide and practice notes in the Notker workspace1234
Song guide and practice notes in the Notker workspace · Select image for a larger, scrollable view
  1. 1
    Choose Notes

    Use the tabs for Guide, Markers, Harmony, or Notes.

  2. 2
    Write a reminder

    Type the cue you want to remember.

  3. 3
    Add at the playhead

    Press + to add the note at the current time.

  4. 4
    Save the annotation

    Choose Save when the note is ready.

Detailed instructions
  1. On Mac, use the pencil beside Notes to edit the song guide and practice notes.
  2. Review the tempo and key estimates; correct them if needed. Add meter, section information, or a reminder such as “start slowly; watch the pickup.”
  3. Use + Add Harmony for a chord label and + Add Marker for a section landmark. Position them against the timeline.
  4. Save your song. Export a Notker Session when you want these annotations available on another device.
Back to contents ↑
09

Save songs & build playlists

Keep your practice material organized for the next session.

Mac Music Library with attached folders and song search1234
Mac Music Library with attached folders and song search · Select image for a larger, scrollable view
  1. 1
    Search your music

    Find a song in attached folders and Notker Songs.

  2. 2
    Browse folders

    Use Folders to go back to the folder list.

  3. 3
    Open a song

    Choose a song row to load it.

  4. 4
    Attach a folder

    Use Add Folder… to browse audio stored elsewhere.

Detailed instructions
  1. Choose Save to keep the current song and its practice settings in your Notker library.
  2. Open Music Library to browse your songs. On Mac, Add Folder… attaches a folder you choose; search by title, artist, album, or path.
  3. Open Playlist and create a named list. On mobile, choose New Playlist, then Create & Add Songs or Create Empty Playlist.
  4. Use Add Songs or Add Current Song where shown. Open a playlist song to practice it; save changes before moving on. On mobile, use Edit in the playlist to change song order.
iPhone playlist with song list, Add Songs, Edit, and Export Playlist1234
iPhone playlist with song list, Add Songs, Edit, and Export Playlist · Select image for a larger, scrollable view
  1. 1
    Add songs

    Choose Add Songs to build the playlist.

  2. 2
    Choose a song

    Tap its row to start practicing.

  3. 3
    Change the order

    Use Edit to reorder playlist songs.

  4. 4
    Transfer the set

    Choose Export Playlist… for a portable copy.

Back to contents ↑
10

Batch separate multiple songs

Mac only · Prepare a whole practice set in one queue.

Batch Separate queue with file, folder, library, and playlist controls123
Batch Separate queue with file, folder, library, and playlist controls · Select image for a larger, scrollable view
  1. 1
    Build the queue

    Add files, a folder, library songs, or a playlist.

  2. 2
    Choose instruments

    Set the parts to use throughout the batch.

  3. 3
    Start the batch

    Choose Start / Resume Batch to continue.

Detailed instructions
  1. Choose Batch Separate at the top of the main Mac window.
  2. Build the queue with Add Files…, Add Folder…, Music Library…, or Add Playlist.
  3. Choose Choose Instruments…. Pick a template, adjust the list, then choose Use for Batch.
  4. Choose Start / Resume Batch. Create or choose a playlist and select Save to Playlist & Start, or choose No Playlist & Start.
Instruments for the whole batch and Use for Batch button123
Instruments for the whole batch and Use for Batch button · Select image for a larger, scrollable view
  1. 1
    Select the template

    Start with a group that fits your practice set.

  2. 2
    Review the parts

    Add or remove instruments before processing.

  3. 3
    Apply to the batch

    Choose Use for Batch to return to the queue.

Playlist choice before starting the batch1234
Playlist choice before starting the batch · Select image for a larger, scrollable view
  1. 1
    Choose a destination

    Create a new playlist or select an existing list.

  2. 2
    Name your playlist

    Give a new practice set a name.

  3. 3
    Save and begin

    Choose Save to Playlist & Start.

  4. 4
    Or skip the playlist

    No Playlist & Start processes without a named set.

Back to contents ↑
11

Export audio files

Take the original recording or separate stems into another audio app.

Mac audio export with stem selection and file format controls12345
Mac audio export with stem selection and file format controls · Select image for a larger, scrollable view
  1. 1
    Choose the destination

    Name the export and choose where to save it.

  2. 2
    Choose a file format

    Pick WAV, AIFF, MP3, or FLAC.

  3. 3
    Select your stems

    Choose Separated stems and check the parts to include.

  4. 4
    Set audio options

    For WAV or AIFF, choose sample rate and bit depth.

  5. 5
    Export the files

    Save full-length audio at original speed and pitch.

Detailed instructions
  1. Choose Export in the sidebar. Enter a filename. On Mac, use Choose… if you want a different destination.
  2. Select WAV, AIFF, MP3, or FLAC in Format.
  3. Choose Original mix or Separated stems. For stems, select the instruments to include. On Mac, Include original mix can include the source as well.
  4. On Mac, WAV and AIFF offer sample-rate and bit-depth choices. MP3 exports at 320 kbps; FLAC uses 24-bit encoding.
  5. Choose Export. On iPhone or iPad, exports save under Notker / Exports; use Share to send files or save them through the system share sheet.
Back to contents ↑
12

Move your work to another device

Export a complete .notker file, send it, and reopen it in Notker.

1Export a sessionAudio + practice settings
→
2Send the fileAirDrop · Files · cloud storage
→
3Open in NotkerMac · iPhone · iPad
Mac Notker Session export including original audio, separated stems, loops, notes, and mix settings12
Mac Notker Session export including original audio, separated stems, loops, notes, and mix settings · Select image for a larger, scrollable view
  1. 1
    Choose Notker Session

    This keeps the audio and practice settings together.

  2. 2
    Keep full-quality audio

    Full quality — keep existing audio avoids conversion.

Detailed instructions
  1. On the source device, Save your latest changes, then choose Export.
  2. Set Format to Notker Session (.notker) and name the file. For Session audio, choose Full quality — keep existing audio to avoid conversion, or another offered encoding if needed.
  3. On Mac, select the destination and choose Export. On iPhone or iPad, choose Share for AirDrop or Save to Files, or Export to save under Notker / Exports.
  4. Transfer the whole .notker document to the other device using AirDrop, Files, or your chosen storage service. Wait for copying or downloading to finish.
  5. With Notker installed on the receiving device: on Mac choose Open; on iPhone or iPad choose Import and select the file, or open it from Files with Notker.
  6. Play the song and check the stems, saved loops, notes, and mix. Save any new work on this device. Export again when you want to send those changes back.
iPhone Export screen set to Notker Session with Session audio and Share controls12345
iPhone Export screen set to Notker Session with Session audio and Share controls · Select image for a larger, scrollable view
  1. 1
    Name the file

    Use a name you will recognize on the other device.

  2. 2
    Choose Notker Session

    Keep audio, stems, loops, notes, and mix settings.

  3. 3
    Keep existing audio

    Choose the full-quality Session audio option.

  4. 4
    Share to another device

    Choose Share for AirDrop or Save to Files.

  5. 5
    Or export locally

    Export saves under Notker / Exports.

Transfer a whole playlist

Detailed instructions
  1. Open Playlist and the list you want to move. Save your latest song and playlist changes.
  2. Choose Export Playlist…. This bundles every playlist song, its audio, stems, and session settings in playlist order into a portable .notker document.
  3. Send the complete file. On mobile, use Import Playlist in Playlist; on Mac, open the portable playlist with Notker. Check the song order and open a song to verify the transfer.
Back to contents ↑
13

Quick reference & troubleshooting

A few answers to keep you moving.

I want to…Use thisResult
Keep practicing on this deviceSaveLocal song and settings
Continue on another deviceExport → Notker SessionPortable .notker with audio and settings
Move an entire practice setExport Playlist…Portable .notker with all playlist songs
Work in a DAW or audio editorExport → WAV / AIFF / FLAC / MP3Original mix or separate full-length stems
I cannot hear the part I changed.

Choose Instrument mix, check that the track is not muted, and turn off unrelated Solo buttons. Check the channel and Master levels and your device’s audio output.

The separation controls are busy.

Wait for the current import, separation, or export to finish. Keep Notker open. Longer recordings and more demanding instrument choices take more time.

My imported file is rejected.

Use a locally available audio file that your device can decode, at 44.1 kHz or 48 kHz. Download cloud files fully first. Protected streaming files cannot be used.

My export does not sound like the practice mix.

Audio exports deliberately use the original speed and pitch without mixer changes. Export a Notker Session to preserve the listening setup inside Notker.

My song is missing on the other device.

Libraries do not sync automatically. Export a complete session or playlist, transfer the whole file, and import it on the receiving device. Copying only a song name or playlist reference does not transfer audio.

I need more help.

Visit Notker Support. Include your device, Notker version, the step you were trying, and any error message.

Mac keyboard reference

Space Play / pauseI Loop InO Loop OutL Loop on / off⌘ L Save loop⌘ S Save⇧ ⌘ M Mixer
Back to contents ↑

Scroll to inspect the controls. Numbered arrows stay with the screenshot.